QUY TRÌNH SẢN XUẤT & THÔNG SỐ KỸ THUẬT

SOBISUNG PRODUCTION DATA SHEET

All Sobisung products were produced by modern production lines and trick test processes.
Design → Casting → Finish polishing → 3 layers of Nikel plating → Chrome plating → Strick testings

STANDARDS COMPONENT OF BRASS MATERIAL
Brass: 62%
Zinc: 35%
Others: 3% (Al, Fe, Sb, Ni, Sn, Cr)

SOBISUNG faucets were finished by 3 layers of Nikel and a layer of Chrome which made really high quality products.
   Chrome Plating:                 0,2㎛  ~  0,25㎛
   3 layers of Nickel plating: 7,0㎛ ~ 8,0㎛

SOBISUNG, HIGH QUALITY PRODUCTS IN COMPARATION WITH OTHERS
  • Plating

     SOBISUNG PRODUCTS

    OTHERS

    Faucet

    Accessories

    Faucet

    Brass

    Zinc

    Brass

              Zinc

    Brass

    Zinc

    Chrome

    0,2㎛~0,25㎛

    0,25㎛

    0,2㎛

    0,25㎛

    0,18㎛

    0,15㎛

    Nickel

    7,0㎛~8,0㎛

    10㎛~12㎛

    6,5㎛

    8,0㎛

    4,0㎛

    06,0㎛



  • RUBBER INSIDE FAUCET DATA SHEET
    Testing Item Testing Result
    Hardness 72Hs
    Tensile Strength 179.3kgf/㎠
    Elongation 394%
    Hardness Change +2Hs
    Tensile Strength Change +3.6%
    Elongation Change -27.6%
    Compression Set(100˚C x 70H) 13.9%